Crack Sealing
Crack Facts:
- Cracks allow moisture into and beneath asphalt.
- Water expands and contracts with temperature & penetrates into
the base causing failures sooner or later. - Small Cracks always become Big Cracks. Big Cracks soon become potholes.
- Cracks from 3/8” up to 1" can be sealed with Hot Rubber sealant.
Our Crack Sealing Process:
- Clean out crack using Grazor or compressed air
- Pour Hot Rubber at 330-370 Degrees F using specially designed Melter/Applicator
- Top with De-tack or specialty sand compound, if necessary
Safe Seal® Protects a Local School
Safe Seal® protects asphalt pavements against:
- Moisture and surface water penetration
- Oxidation caused by the sun's ultraviolet rays
- Freeze/thaw cycle
- Oil and chemical spills
- Surface deterioration and cracking
- Durability of Safe Seal® is up to 5 times greater than other conventional asphalt emulsion coatings.
Pavement Sealer Safe Seal® is environmentally friendly
- Contains low VOC's
- Emits no obnoxious odor or fumes
- Contains no solvents, no asbestos, no lead, and no mercury
- Non-flammable
- Our asphalt emulsion does not contain carcinogenic materials like those found in coal tar sealers (Report on Carcinogens, 11th ed.)
- No Chemical Burn unlike (coal Tar Sealers)
- Safe Seal® will not create an environmental hazard